You are here

Introduction to Bluetooth Low Energy System Design + Energy Harvesting Design | サイプレス セミコンダクタ

Introduction to Bluetooth Low Energy System Design + Energy Harvesting Design

Workshop Sponsor: Arrow

Workshop Date: June 16th, 2016

Workshop AddressGoogle Map Link

1732 North First Street, Suite 300

San Jose, CA 95112

Workshop Start / End Time: 8:30am - 5:00pm

​Food Provided: Breakfast & Lunch

Workshop Contact Person: Greg Poole

Psoc_Ble_Landing_Page Banner

Workshop Overview: Morning

Cypress’s PSoC® 4 Bluetooth Low Energy is an easy-to use, Arm® Cortex™-M0 based, single-chip solution which integrates programmable analog front ends, programmable digital peripherals, CapSense® technology for touch-sensing, and a Bluetooch® LE (Low Energy) or Bluetooth Smart radio.

PRoC® Bluetooth Low Energy is an easy-to-use, Arm Cortex-M0 based, single-chip solution which integrates a Bluetooth LE radio and Cypress's CapSense technology for touch-sensing.

Cypress's Solar-Powered IoT Device Kit provides a complete, easy-to-use platform that can be used to design a solar-powered IoT Device with Bluetooth LE. The Energy Harvesting System (EHS) uses Cypress's new S6SE101A Energy Harvesting PMIC optimized for solar energy, and Bluetooth Low Energy connectivity is provided by Cypress's EZ-Bluetooth Low Energy PRoC Module. Firmware and application software to implement a Wireless Sensor Node (WSN) that transmits sensor data as a Bluetooth Low Energy Beacon is also included.

By the end of this workshop, you will:

  • Understand Cypress's Bluetooth Low Energy one-chip solutions including PSoC 4 Bluetooth Low Energy and PRoC Bluetooth Low Energy
  • Understand the Bluetooth Low Energy architecture
  • Learn how to use Cypress's Bluetooth Low Energy solutions and development environment to implement:
    • - Bluetooth Low Energy connections with PSoC 4 Bluetooth Low Energy and PRoC Bluetooth Low Energy
    • - One-chip, sensor-based, system designs with Bluetooth Low Energy connectivity for the Internet of Things (IoT)
    • - One-chip, CapSense® touch-sensing user interface designs with Bluetooth Low Energy connectivity
  • Become familiar with Cypress’s Solar-Powered IoT Device Kit
  • Understand the architecture of a solar-powered Wireless Sensor Node (WSN)
  • Understand the architecture of an Energy Harvesting System (EHS)
  • Learn how to develop a solar-powered WSN with EHS by understanding:
    • - How to measure the power delivered by an EHS
    • - How to select EHS components
    • - How to calculate the power required for the EHS Load
    • - How to design and optimize an EHS
  • Create a Network of IoT Devices

Workshop Agenda

Time Topic
08:45 – 09:00 Welcome and registration
09:00 – 09:15 Bluetooth Low Energy and PSoC introduction
09:15 – 09:35 Demo 1, PSoC creator overview
09:35 – 10:05 Lab 1, Bluetooth Low Energy Pioneer Kit Overview and Blinking LED
10:05 – 10:50 Bluetooth Low Energy Solution and architecture overview
10:50 – 11:00 Demo 2, Bluetooth Low Energy component overview
11:00 – 11:15 Coffee Break
11:15 – 12:00 Lab 2, Setting up a Bluetooth Low Energy connection
12:00 – 12:20 Demo 3, Reprogramming Psoc5 on the kit
12:20 – 13:00 Lab 3, IoT sensor based system design
13:00 – 14:00 Lunch
14:00 – 15:00 Energy harvesting concept and introduction
15:00 - 16:00 Solar powered IoT device kit
16:00 – 16:30 Open questions, End of Workshop
 

 

Required Software/Hardware:

PSoC Creator 3.3
CySmart
Windows laptop with at least 2 USB Ports

Click to register for Free today!