FM4 S6E2H-Series Motor Control Arm® Cortex®-M4 Microcontroller (MCU) Family | サイプレス セミコンダクタ

FM4 S6E2H-Series Motor Control Arm® Cortex®-M4 Microcontroller (MCU) Family

S6E2H-Series are highly integrated 32-bit microcontrollers with high performance and competitive cost. This series is based on the Arm Cortex-M4F processor with on-chip flash memory and SRAM. The portfolio includes serial communication interfaces (UART, CSIO (SPI), I2C, LIN), 2 CAN bus interfaces  and advanced control peripherals such as motor control timers, A/D converters and a Quadrature Position/Revolution Counter.


S6E2H-Series Highlights


High-Performance MCU Subsystem

  • 540 CoreMark®, 160-MHz Arm® Cortex®-M4 CPU
  • 188-µA/MHz active current with 2.7-V to 5.5-V operating voltage
  • Ultra-low power 1.3-µA real-time clock (RTC) operating current
  • Up to 512KB flash and 64KB SRAM with a 16KB flash accelerator
  • Error-Correcting Code (ECC) support, hardware Watchdog timer (WDT), low-voltage detect, and clock supervisor blocks for safety-critical applications


  • 3x Multi-Function Timers (MFT)
  • 9x Programmable Pulse Generators (PPG)
  • 8x Base Timers, 3x Quadrature Position/Revolution Counters (QPRC)
  • 1x Dual Timer, Cyclical Redundancy Check (CRC), and Watch Counter
  • 8x channels of Multi-Function Serial (MFS) interfaces configurable as SPI, UART, I2C, or LIN
  • 2x CAN, SD Card and External Bus Interface

Analog Subsystem

  • 3x 12-bit, 2-Msps ADC with a 24-channel multiplexer input


S6E2HG-Series Block Diagram


Watchdog Timer
Cyclical Redundancy Check
3 Controller Area Network
4 Memory Protection Unit
5 Direct Memory Access
6 Descriptor System Transfer Controller

Function Differences between each S6E2H-Series by part

Series S6E2HG S6E2HE S6E2H4 S6E2H1
CAN 2 ch. (Max) - 2 ch. (Max) -
SD Card Interface 1 unit 1 unit - -


FM4 S6E2H-Series Datasheets
  • The FM4 S6E2H-Series datasheets are intended to provide quick reference for this FM4 series.
FM4 S6E2H-Series Flash Specifications
  • Flash Programming Manual explains the functions, operations and serial programming of the flash memory for FM4 S6E2H-Series devices. This manual is intended for engineers engaged in the actual development of products using the FM4 devices. 
FM4 S6E2H-Series Technical Reference Manual
  • The FM4 Technical Reference Manual provides detailed information on the device features and how they work. It is intended for advance user's who want to understand what's going on under the hood.
アプリケーション ノート


Peripheral Driver Library

FM MCU Peripheral Driver Library (PDL)

The FM MCU Peripheral Driver Library (PDL) simplifies software development for the FM0+, FM3, and FM4 MCU families. The PDL reduces the need to understand register usage and bit structures, thus easing software development for the extensive set of peripherals in the FM families. You configure the library for the particular device, and then use API calls to initialize and use a peripheral. Using the PDL makes it easier to port code from one family to the other, because the same code supports all FM families.


Support Tools

Vendor Link Comments
IAR Systems!?architecture=ARM IAR Embedded Workbench for Arm 7.50.2 or later
Arm Keil Keil Embedded Development Tools for Arm 5.17 or later
GCC Arm Embedded GCC Arm Embedded 4.9-2015-q1-update or later
iSystem iSYSTEM winIDEA 9.12 or later



Click on the link below to download the tool

Product 説明
Pin and Code Wizard Tool that helps set the IO ports for Cypress's 32-bit Arm Cortex FM MCUs
Serial Port Viewer Tool Tool that is used to monitor all available com ports and provides a terminal emulator
CMSIS-DAP USB Drivers CMSIS-DAP is the interface firmware for a Debug Unit that connects the Debug Port to USB. Debuggers, which execute on a host computer, connect via USB to the Debug Unit and to the Device that runs the application software
FLASH Programmer Tool that converts RS232C data to readable data on your PC
USB Wizard Tools that supports editing USB descriptors and templates

FM4 S6E2H-Series Starter Kit

These kits will help you get started with FM4 MCU development.



Arm® Cortex®-M4 MCU FM4 S6E2H-Series Starter Kit

The Sample Programs ("Programs") are offered for use in developing systems for Cypress microcontrollers.

The Programs will be useful in the following situations:

  • I need a simple sample program, as I am going to develop software. The sequence of resource access, among others, can be confirmed using these Programs.
  • I would like to examine, before development, whether each resource will operate as expected.
    The Programs support several specifications, even for the operation of one resource.
  • If resources do not operate properly on my system, I would like software for which confirmation of operation has been completed. Cypress has confirmed the actual operation of the Programs on each of its microcontrollers, so you will be able to compare your program with the Program.

For the FM portfolios, code examples are provided with the Peripheral Driver Library (PDL). Download and install the PDL, and look in the examples folder.