|Low-Power Modes - CE225540
||The Low-Power Modes code example demonstrates low-power modes on CYW20819 using ModusToolbox™ IDE.
|BLE Find Me Profile - CE226123
||The BLE Find Me Profile code example demonstrates the implementation of a simple BLE Immediate Alert Service (IAS)-based Find Me Profile (FMP) using the CYW20819 Bluetooth SoC, using ModusToolbox™ integrated development environment (IDE).
|BLE Environment Sensing Temperature - CE226300
||The BLE Environment Sensing Temperature code example demonstrates the implementation of a simple BLE Environmental Sensing Profile and how to send environment-sensing parameters like temperature by making use of an on-chip ADC and sending values over a BLE PHY2M link using the CYW20819 Bluetooth SoC. This example uses the ModusToolbox™ integrated development environment (IDE).
|BLE Throughput Measurement - CE226301
||The BLE Throughput Measurement code example demonstrates measuring the BLE throughput at the GATT layer using the CYW20819 Bluetooth SoC with the ModusToolbox™ integrated development environment (IDE).
|SPI-Based Datalogger - CE226537
||The SPI-Based Datalogger code example includes two applications that demonstrate the operation of multiple Serial Peripheral Interface (SPI) interfaces using the CYW20819 Bluetooth SoC and ModusToolbox™ Integrated Development Environment (IDE). The first application demonstrates operation of two SPI masters – one for collecting sensor data and the other for logging the data to external flash. The second application demonstrates operation of an SPI slave which is used for providing sensor data to the first application.
|WICED CYW920819EVB-02 BLE_MESH_Dimmer
||The demo app
BLE_Mesh_Dimmer shows a simple light dimmer on the CYW920819EVB-02 kit or CYBT-213043 MESH EVAL kit. A dimmer has two buttons to turn the light ON and OFF. This application performs dimming using a single button available on the EVK. On a short push, the level is toggled between 0% and 100%. When a button is kept pushed, the level is changed every 0.5 seconds from 0 to 100 in 8 steps 12.5% each. The button can be released before the level reaches 100%; in this case, a consecutive push or long push will continue increasing the level. If the level reaches 100%, the next button control will decrease the level.
|WICED CYW920819EVB-02 BLE_MESH_Light_Dimmable
||This document shows a simple implementation of a dimmable light. The app is based on the snip/mesh/mesh_light_lightness sample, which implements BLE Mesh Light Lightness Server Model. The Light lightness Server Model extends Generic OnOff and Generic Level; the dimmable light can be controlled by a switch (Generic OnOff Client), a Dimmer (Generic Level Client), and an application which implements the Light lightness Client. The WICED Mesh Models library takes care of the translation of OnOff and level messages and the application layer processes the messages of the Light lightness Model.