You are here

CY4541 EZ-PD™ CCG4 Evaluation Kit | サイプレス セミコンダクタ

CY4541 EZ-PD™ CCG4 Evaluation Kit

2018 年 8 月 29 日
The CY4541 EZ-PD™ CCG4 Evaluation Kit (EVK) is based on the Cypress’s CCG4 dual port Type-C Power Delivery (PD) controllers. EZ-PD™ CCG4 is a dual USB Type-C controller that complies with the latest USB Type-C and PD standards. This EVK is primarily intended to be a demonstration vehicle for Type-C PC designs that house one or two Type-C ports. CCG4 can act either as a power provider (Source) or as a power consumer (Sink). The kit also helps to evaluate several features on two Type-C ports, using a Dual Role Port (DRP) or SuperSpeed USB demo, and a DisplayPort demo.

CY4541 EZ-PD™ CCG4 Evaluation Kit enables designers to exercise the functionality of CCG4 controllers for a Two-Port USB Type-C based Host System.

CY4541 kit consists of:

  • CCG EVK Base Board (2 nos.) with Display Port Mux, Power Management and USB Type-B connector
  • CY4541 CCG4 Daughter Card
  • 24V DC Power Adapter
  • USB 3.0 Type-A to Type-B Cable (2 nos.)
  • USB Type-C to Type-A Adapter (2 nos.)
  • USB 3.0 EMCA Type-C Cable 
  • USB 2.0 Type-A to Mini-B Cable
  • Pair of Jumper Wires (2 nos.)

    注: One pair of jumper wires are pre-installed on the CCG EVK Base Boards.

CY3295 Kit Image

For more information on this evaluation kit and to buy this board, please contact