CYBLE-224116-01: EZ-BLE™ Creator XT/XR BT 4.2 Module | サイプレス セミコンダクタ
CYBLE-224116-01: EZ-BLE™ Creator XT/XR BT 4.2 Module
The Cypress CYBLE-224116-01 is a fully certified and qualified module supporting Bluetooth Low Energy (BLE) 4.2 wireless communication. The CYBLE-224116-00 is a turnkey solution that includes onboard power amplifier (PA), low noise amplifier (LNA), crystal oscillators, chip antenna, passive components, and the Cypress PSoC® 4 BLE.
The EZ-BLE PSoC® XT/XR BT 4.2 module provides extended industrial temperature operation (XT) as well as extended communication range (XR). The EZ-BLE XT/XR module is a scalable and reconfigurable platform architecture, combining programmable and reconfigurable analog and digital blocks with flexible automatic routing. The CYBLE-224116-00 also includes digital programmable logic, high-performance analog-to-digital conversion (ADC), opamps with comparator mode, and standard communication and timing peripherals.
The CYBLE-224116-01 includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides up to 25 GPIOs in a small 9.5 × 15.4 × 1.80 mm footprint. The CYBLE-224116-01 is a complete solution and an ideal fit for applications seeking a highly integrated BLE 4.2 wireless solution.
The CYBLE-224116-01 is drop-in compatible with the CYBLE-224110-00 module.
- Module size: 9.5 mm × 15.4 mm × 1.80 mm (with shield)
- Extended Range: Up to 400 meters line-of-sight
- Extended industrial temperature range: –40℃～+105℃
- Up to 25 GPIOs
- 256-KB flash memory, 32-KB SRAM memory
- Bluetooth 4.2 qualified single-mode module
- Certified to FCC, CE, MIC, KC, and ISED regulations
- 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
- Programmable analog
- 4 x Opamps
- 1 x 12-bit, 1-Msps SAR ADC
- 1 x Low-Power Comparators
- 1 x Cypress CapSense™ touch controller with SmartSense™ Auto-Tuning
- Programmable digital
- 4 x universal digital blocks
- 4 x 16-bit configurable Timer/Counter/PWM blocks
- 2 x configurable serial communication blocks
- Watchdog timer with dedicated internal low-speed oscillator (ILO)
- Two-pin SWD for Programming
- Certified to FCC, CE, MIC, KC, and ISED regulations. Refer to KBA213260 for RF certification test reports.
- Bluetooth SIG 4.2 qualified
- CYBLE-224116-EVAL EZ-BLE™ Creator BT 4.2 XT/XR Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module