You are here

CYBLE-012011-00: EZ-BLE™ Creator Module | サイプレス セミコンダクタ

CYBLE-012011-00: EZ-BLE™ Creator Module

2020 年 9 月 01 日

The CYBLE-012011-00 is a turnkey Bluetooth® Low Energy (BLE) wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PSoC™ 4 BLE chip.  The CYBLE-012011-00 includes FCC/ISED/KC/MIC/CE RF certification and Bluetooth SIG qualification.  The CYBLE-012012-00 module does not include RF certifications or Bluetooth SIG qualification. 

The CYBLE-012011-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-012011-00 includes 128KB of Flash and 16KB of SRAM.

The CYBLE-012011-00 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-012011-00 is qualified with Bluetooth SIG, and is certified for RF compliance with FCC, IC, CE, MIC, and KC regulatory agencies.

Module Description

  • Module size: 14.52 mm × 19.20 mm × 2.00 mm (with shield)
  • Bluetooth 4.1 single-mode module
  • 工業用温度範囲に対応: –40℃~+85℃
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • 128-KB flash memory
  • 16-KB SRAM memory
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for programming
  • Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
  • Certified to FCC, CE MIC, KC, and ISED regulations. Refer to KBA210638 for RF certification test reports.
  • Bluetooth SIG 4.1 qualified 
  • CYBLE-012011-EVAL EZ-BLE™ Creator Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module