You are here

AN84858 - PSoC®4 Programming Using an External Microcontroller (HSSP) | サイプレス セミコンダクタ

AN84858 - PSoC®4 Programming Using an External Microcontroller (HSSP)

最終更新日: 
2018 年 9 月 17 日
バージョン: 
*M
AN84858 shows you how to implement PSoC® 4 device programming with an external microcontroller by using modular C code. In this process, called Host Sourced Serial Programming (HSSP), the host microcontroller programs PSoC 4 through the serial wire debug (SWD) interface. The C code is written so that it can be ported to any microcontroller with minimal changes, speeding up HSSP application development for PSoC 4.
はじめに

PSoC 4 device programming refers specifically to the programming of the nonvolatile memory in PSoC 4 by using an external host programmer. The host can be the programmer supplied by Cypress (CY8CKIT-002 MiniProg3), a third-party programmer, or a custom programmer (e.g., an on-board microcontroller). This application note explains how to implement a host programmer to program a PSoC 4 device.



Project
Device
Development Kit

CY8CKIT-xxx
Compiler
アーキテクチャ
Silicon

Revision
V3.2

or higher
V3.0 or

Lower
001

DVK
Keil
GCC
MDK
RVDS
AN84858.zip
PSoC 5LP
Prod
はい
いいえ
はい
はい
いいえ
はい
はい
はい

Refer to KBA93541 for a method to program a PSoC 4 using CY8CKIT-049. 

翻訳版のドキュメントは参照用です。設計開発に携わっている場合には、英語版のドキュメントを参照されることをお勧めします。