AN60590 - PSoC® 3, PSoC 4, and PSoC 5LP - Temperature Measurement with a Diode | サイプレス セミコンダクタ
AN60590 - PSoC® 3, PSoC 4, and PSoC 5LP - Temperature Measurement with a Diode
AN60590 explains diode-based temperature measurement using PSoC® 3, PSoC 4, and PSoC 5LP. The temperature is measured based on the diode forward bias current dependence on temperature. This application note details how the flexible analog architecture of PSoC 3, PSoC 4, and PSoC 5LP enables you to measure diode temperatures using a single PSoC device.
はじめに
Temperature is the most common and frequently measured environmental variable. Temperature measurements typically use one of the four sensors: thermocouple, thermistor, diode, and resistance temperature detector (RTD). The primary criteria for choosing a sensor are cost, accuracy, and temperature range.
The following table provides the list of devices, the supported Creator version, Development kit and Compiler for this application note project:
Project |
Device
|
PSoC Creator
Version |
Development Kit
CY8CKIT-xxx |
Compiler
|
|||||||
アーキテクチャ
|
Silicon
Revision |
V3.1 CP1 or higher |
V3.0 CP7
|
001
DVK |
Keil
|
GCC
|
RVDS
|
MDK
|
|||
AN60590.zip |
Prod
|
はい
|
いいえ
|
はい
|
YES*
|
いいえ
|
はい
|
なし
|
なし
|
なし
|
|
Prod
|
はい
|
いいえ
|
はい
|
YES*
|
いいえ
|
なし
|
はい
|
はい
|
はい
|
||
Prod
|
はい
|
いいえ
|
はい
|
YES*
|
いいえ
|
なし
|
はい
|
はい
|
はい
|
* Refer to Migrating CY8CKIT-001 DVK project to CY8CKIT 030/ 050.
Projects associated with this application note can be downloaded from the 'Related Files' section below. For your convenience, we have provided projects that are compatible with the most recent version of PSoC Creator:
- AN60590.zip is used with PSoC Creator 3.1 CP1
The project’s default settings may not be compatible with your device or kit, and you may need to change your project settings. For more information, see: