Community| English|
閉じる
|

You are here

EZ-USB® FX3S™ | Cypress Semiconductor

EZ-USB® FX3S™

SuperSpeed Your Design with FX3S!

 

Cypress EZ-USB® FX3S™ is the latest addition to the highly successful EZ-USB® FX3™ family of SuperSpeed USB 3.0 peripheral controllers.In addition to USB 3.0 functionality and a powerful ARM core, FX3S’s integrated storage host controllers enable developers to add support for SD/eMMC memories and SDIO devices to their system.

Based on the proven FX3 Platform, FX3S leverages FX3’s familiar ecosystem and package to reduce your time-to-market and design complexity.FX3S has the fully configurable General Programmable Interface (GPIF™ II), which can interface with virtually any processor, ASIC, Image Sensor or FPGA with a parallel port.同期スレーブFIFO、非同期SRAM、非同期および同期アドレス/データの多重化インタフェース、コンパクトフラッシュなど、人気の高い多くのインタフェースに、容易かつグルーレスな接続を提供します。Additionally, users can define their own custom master and slave interfaces using the Cypress’s GPIF™ II Designer Tool.

FX3S supports up to 2 storage ports allowing developers to greatly expand their system capabilities.It supports SD 3.0 (UHS-I), eMMC 4.41 and SDIO 3.0 standards.Full flexibility in terms of simultaneous datapaths (U-Port <--> S-Port, P-Port <--> S-Port, U-Port <--> P-Port) allows system to do data storage and data transfer at the same time.FX3S can support up to 2TB SDXC cards giving tremendous data capacity.By using 2 eMMC devices in parallel, developers can theoretically support up to 208 MBps of data storage bandwidth.Using SDIO 3.0, developers can greatly expand their system capabilities to support features such as Wifi, GPS, LTE, etc.

USB 3.0は非圧縮のHDビデオの転送に対応する5Gbpsリンクを提供し、DSC、DVC、ウェブカメラ、防犯カメラ、マシンビジョン、医用画像処理、監視装置などのアプリケーションを実現します。EZ-USB FX3S seamlessly connects to any HD image sensor and transmits uncompressed video traffic through a USB 3.0 port.

Need 32-bit interface to extract full USB 3.0 bandwidth without storage support?EZ-USB FX3™ can do the job.Click here to find out more.

Accelerate your USB 3.0 design with the SuperSpeed code examples

  1. Read the Getting Started with FX3 Application note and USB RAID 1 Disk Design Using EZ-USB® FX3S Application note
  2. Purchase the FX3S RAID-on-Chip Dongle or the FX3S Development Kit from the Pactron Store)
  3. Download the FX3S Software Development Kit
  4. Watch the FX3S RAID-on-Chip Boot Disk Kit Demo video
  5. Start your first FX3S design and refer to the SuperSpeed code examples
  6. Get your Schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System

FX3S RAID-on-Chip USB Dongle

The FX3S RAID-on-Chip USB Dongle kit is a reference kit made by Pactron Inc. The kit uses CYUSB3035 and is used to demonstrate the RAID1 functionality of FX3S.The kit comes packaged with 2 SD cards and is pre-programmed with RAID1 firmware.It is ready to use right off the box as a RAID 1 USB Dongle.The kit comes with a companion application note AN89661 available for download here.

Pactron is a Silver level partner of the Cypress Design Partner Program.The kit is available for purchase from the Pactron Store at http://pactronstore.com/products/fx3s.html.

The kit comes with the following features:

  • Support for USB 3.0
  • Built in RAID 1 Functionality
  • Built in Auto Synchronization of SD cards
  • SPI flash for boot
  • 10 pin connector that support UART and 4-bit MMC slave
  • Jumper for firmware flashing
  • LED indicators

FX3S DVK

The FX3S DVK is made by Pactron Inc. The kit uses CYUSB3035 and is used to demonstrate the functionality of FX3S.The kit supports 2 8-bit storage ports that can be SD3.0, SDIO3.0 or eMMC 4.41. The kit comes with a 8-bit SD connector.eMMC paddle boards compatible with SD sockets can be used to evaluate eMMC.This kit is compatible with the FX3 SDK which has support for FX3S.The FX3 SDK can be downloaded from FX3.

Pactron is a Silver level partner of the Cypress Design Partner Program.The kit is available for purchase from the Pactron Store at http://pactronstore.com/products/fx3s-fpga-dev-kit.html.

The kit comes with the following features:

  • Support for USB 3.0
  • Support for 2 8-bit storage ports that can be either SD3.0, SDIO3.0 or eMMC4.41
  • Support for all boot modes as specified in the FX3S datasheet
  • Support for JTAG Debug
  • P-Port connector to connect to FPGA’s or application processors
  • RS-232 line drivers to connect to PC COM port
  • High Performance Data Acquisition System
  • Industrial Cameras
  • Servers
  • Machine Vision
  • Scanners (Portable, High-end business, Fingerprint, Palm, etc.)
  • プリンタ
  • Gaming Consoles
  • Instrumentation and Measurement
  • Digital Video Cameras
  • Digital Still Cameras
  • 3D Cameras
  • Medical Imaging Devices
  • Traffic and Security Cameras
  • Video IP Phones
  • Integration:PHY内蔵のフルUSB 3.0ペリフェラルコントローラ
  • Storage Support:Support up to 2 memory cards- SD 3.0, eMMC 4.41, SDIO 3.0
  • High-Performance:データ処理用に512kBのRAMが搭載されたARM9
  • Connectivity:I2C, I2S, SPI and UART peripherals
  • Flexibility:Configurable 16-bit 100 MHz GPIF™ II interface connects with any processor/sensor/ASIC/FPGA with parallel port
  • Low Power:低電圧1.2Vコアおよび独立したパワードメイン
  • Multitasking:32 configurable endpoints
  • Flexible Clock:19.2、26、38.4および52MHzのクロック入力または19.2MHzの水晶発振子から選択可能
  • Small Footprint:10x10mm、0.8mmピッチの121ボールBGAパッケージ
Powered By OneLink