CCG2 60W Car Charger Reference Design | Cypress Semiconductor
CCG2 60W Car Charger Reference Design
The CCG2 60W Car Charger Reference Design Board is a receptacle based USB-C Charger with USB PD 2.0 support.In the PD mode, it supports 5V@3A, 7V@3A, 8V@3A, 9V@3A, 12V@3A, 15V@3A and 20V@3A output. The board can be programmed to support any output voltage between 0 to 20V with 100mV resolution.It is designed to work with standard Car Lighter Attachment (CLA).It works with any DC input between 4V to 24V.
The two major components on the board are Cypress’s EZ-PD CCG2 (CYPD2134-24LQXIT) controller and On Semiconductor’s NCP81239 DC-DC Buck-Boost controller.
The CCG2 device handles USB Type-C interface, Power Delivery (PD) 2.0, Cable compensation and primary Over Current Protection (OCP).The buck-boost conversion, Over Current Protection (OCP) and Over Voltage Protection (OVP) are handled by On Semiconductor’s NCP81239 DC-DC Buck-Boost controller.The board hardware design files (schematic, bill of materials, layout etc) are readily available below for customers to reduce the design cycle.
For any questions regarding the reference design, please contact Online Tech Support Case System.