You are here

CYBLE-212020-01, EZ-BLE™ PRoC™ Bluetooth 4.2 Module | Cypress Semiconductor

CYBLE-212020-01, EZ-BLE™ PRoC™ Bluetooth 4.2 Module

2017 年 6 月 12 日
Qualification and Certification:Bluetooth SIG QDID FCC, CE, IC, MIC and KC Small Footprint:14.5 mm x 19.2 mm x 2.0 mm, 31-pad SMT with 23 GPIO Bluetooth Smart Connectivity with Bluetooth 4.2:2.4-GHz BLE radio and baseband -87-dBm Rx sensitivity, +3-dBm Tx output power Power Modes:1.3-µA Deep-Sleep, 150-nA Hibernate, 60-nA Stop Highly Integrated Solution:2 crystals, trace antenna, passives, shield

The CYBLE-212020-01 is a turnkey Bluetooth‚ Low Energy (BLE) wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PRoC™ BLE 256KB chip.The CYBLE-212020-01 includes FCC/IC/KC/MIC/CE RF certification and Bluetooth SIG qualification.The CYBLE-212020-01 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture.The CYBLE-212020-01 includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package.The CYBLE-212020-01 is drop-in compatible with the CYBLE-X120XX-X0 modules.The CYBLE-212020-01 is targeted at applications requiring large memory size and Bluetooth 4.2 compliance all in a cost-optimized solution.

Module Description

  • Module size:14.52 mm ×19.20 mm × 2.00 mm (with shield)
  • Castelated solder pad connections for ease-of-use
  • 256-KB flash memory, 32-KB SRAM memory
  • Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog,HI-Z digital, or strong output
  • Bluetooth 4.2 single-mode module
  • 工業用温度範囲に対応:–40℃~+85℃
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for programming
  • Certified to FCC, CE MIC, KC, and IC regulations. Refer to KBA210638 for RF certification test reports.
  • Bluetooth SIG 4.2 qualified
  • CYBLE-212020-EVAL EZ-BLE™ PRoC™ BT 4.2 Evaluation Board to evaluate and develop applications on the EZ-BLE PRoC Module