RF Remote Control | Cypress Semiconductor
Cypress provides a portfolio of low cost, low power & high performance solutions for RF remote controllers.The solutions also provide simultaneous support for legacy IR operations.The following block diagrams illustrate a typical remote control device based on WirelessUSB™-NL, Cypress’ 3rd generation 2.4 GHz radio.Please click on the MCU block to view or sample recommended MCUs.
Figure 1:Remote Control
The advent of smart TVs is driving the demand of new features on remote controls such as non-line-of-sight (NLOS) operations, greater range, faster button response, bi-directional data support, operation at high angle (>45%), etc. Currently, the predominant technology for TV remote controls is Infrared (IR).But low range, low data rate & line of sight constraints make IR unsuitable for meeting these new features.Support of these features necessitates the use of RF in remote control designs.
Cypress’ remote control solutions are based on enCoRe MCU & WirelessUSB RF products.Cypress' WirelessUSB technology offers an unparalleled feature set to enable superior RF performance, interference immunity, range, and maximum battery life.In addition, enCoRe MCUs feature an 8-bit RISC core with flash memory, low power and a variety of internal peripheral functions.
An enCoRe & WirelessUSB solution can support both IR & RF technologies simultaneously.It features low power (can support >100,000 button presses with single coin cell battery), reduced BOM, battery management support & operation at angles up to 60 degrees.The solution is complemented by drivers & firmware that has support for both IR & RF transmission.
When product designers use reference designs as a basis for their own projects, they typically modify or enhance the original designs.Unfortunately, these modifications can cause a considerable decline in performance.
This application note provides guidelines for calculating expected battery life in 2-way WirelessUSB products for engineers who are familiar with these basic power management concepts.
This application notes discusses avoiding interference using WirelessUSB.
AN5033 describes the guidelines for the antenna design and in particular, addresses the design of an integrated printed trace wiggle antenna implementation on a reference printed circuit board (PCB).
AN6066 discusses the general considerations for deciding on a binding methodology of devices in robust wireless systems, and also gives examples of common binding schemes, highlighting their advantages and disadvantages.It is intended for system architects, particularly those who are relatively new to wireless designs.
Wireless products are now found in abundance, all around us today, and their usage continues to rapidly expand.This application note introduces the Cypress CYRF8935 device and a sample PCB design.The appendix section guides you on antenna selection process.
AN72428 discusses the hardware considerations and recommended practices for systems that use WirelessUSB™ NL, the Cypress third generation 2.4-GHz low-power RF technology.WirelessUSB NL operates in the 2.4-GHz ISM band and delivers the next level of low-power performance on a small 4-mm × 4-mm footprint.
The CY3631 WirelessUSB Manufacturing Test Kit (MTK) is an automated platform that enables customers to quickly test their WirelessUSB-enabled products without the need for expensive RF test equipment.
The CY3668 WirelessUSB-NL development kit provides a generic platform for developing wireless applications based on the WirelessUSB-NL radio and enCoRe II & enCoRe V MCU devices.
CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit (RDK)は、BLE無線通信の超小型ソーラー パワー駆動IoTデバイスを迅速に設計するためにデザインされています。
CYALKIT-E04 S6AE102A and S6AE103A Evaluation Kit
Designers can create frequency-agile 2.4-GHz designs using procedures provided by standards bodies or by building their own protocol.
Traditionally a product perceived to be more of a bundled accessory, remote controls are starting to play a more significant role i
Cypress wireless solutions share the unique qualities of ultra-reliable, low-power, and are optimized for wireless HID applications.The product portfolio features a rich assortment of 2.4 GHz radios & 8-bit companion MCUs.
Cypress's WirelessUSB RF solutions are designed for short-range, multipoint-to-point connectivity and use 2.4 GHz ISM band.Cypress's patented WirelessUSB technology offers unparalleled feature set to enable superior RF performance, interference immunity, and maximum battery life
RF コンパニオン マイクロコントローラ
- PSoC Creator
PSoC Creator は、最新技術を駆使したソフトウェア開発 IDE とグラフィック設計エディタを組み合わせ、他に類を見ないほど強力なハードウェアとソフトウェアの同時設計環境を実現しました。
- PSoC Designer
PSoC Designer は、特定アプリケーションの用件を満たすようPSoCをカスタマイズするのに使う画期的な統合設計環境（IDE）です。PSoC Designer ソフトウェアは、システム ブリング アップや製品化までの期間短縮を支援します。
- WirelessUSB-NL Radio Driver
The WUSB-NL radio driver provides users with a consistent interface to the WUSB-NL radio.The driver is designed to interface with both C and assembly written applications.