You are here

Power Supervision | Cypress Semiconductor


Power Supervision plays a critical role in modern communications and industrial systems such as routers, switches, storage systems, servers, base stations, industrial automation equipment and medical imaging equipment.These systems require multiple power supply rails for their various components including ASICs, PHY devices, FPGAs, CPUs, memory modules, and peripheral I/O devices.

Power Supervision is a mission-critical function for system reliability.System power must work flawlessly.The designer needs to ensure that all the power rails are ramped up and down in the proper sequence with proper delays, they are monitored for irregular activity and fault detection and response must be fast and flawless.

Your mission-critical systems need fail-safe Power Supervision

Design Considerations

Design Challenges

The race to build higher performance systems and the demand for reliable energy-efficient products is posing new challenges to designers.

  1. Low-voltage power rails demand higher accuracy
    Monitoring voltage and current accuracy is critical to system reliability
    Trimming voltage accuracy is critical to maintain optimal voltage ranges
    The latest FPGAs and DSPs have low-voltage rails (1 V and below), requiring…
    Sub-0.5% (5-mV) monitoring accuracy (need expensive analog ICs)
    Sub-1.0% (10-mV) real-time trimming accuracy (need more expensive analog ICs)
  2. The number of power rails is increasing
    20+ power rails per board need Power Supervision
    Requiring up to 10 Power Supervision ICs per board
    More ICs = more points of failure
  3. Each board requires complex customization
    Different number of power rails
    Different Voltage Sequencing, Power Monitoring, and Trimming parameters
    Fault Detection and Fault Logging referenced to custom thresholds
    Power Supervision and analog ICs from multiple vendors complicate and slow development

PSoC solves these problems

PSoC monitors voltage and current with 0.26% accuracy and performs real-time Trimming with 0.60% accuracy

PSoC supports 32 power rails per chip, 3x other Power Supervision ICs, reducing points of failures

PSoC Component Configuration Tools create customized power rail configurations with Event-Based Sequencing

PSoC creates a one-chip, customized, fail-safe Power Supervision solution


  1. Select the right PSoC for your application (see table below)
    PSoC 5
    PSoC 3
    PSoC 1
    Number of voltage rails sequenced
    up to 32
    up to 32
    up to 20
    Number of voltage and current monitoring inputs
    up to 32
    up to 32
    up to 24
    ADC based voltage and current monitoring accuracy
    Number of trimming/margining outputs
    up to 32
    up to 32
    up to 12
    EEPROM fault and event log size
    up to 2KB
    up to 2KB
    up to 2KB
    Embedded MCU Core
    ARM Cortex - M3
  2. Watch a PSoC Power Supervision Training Video
  3. Download Install the PSoC Integrated Design Environment
  4. Download the PSoC Power Supervision Application Note
  5. Purchase the PSoC Power Supervision Kit and Prototype the Example Project Design (bundled with kit)
  6. Configure your Design using Power Supervision Components or User Modules (Refer to the Power Supervision Application Note)

Integrate Additional Functions with PSoC

Apart from the standard Power Supervision functionality PSoC enables integration of additional functions.This could enable further BOM integration and cost savings (some examples below)

Fan Control & Thermal Management: AN66627 (PSoC 3 and PSoC 5), AN78692 (PSoC 1)

Temperature Sensing: Temperature Sensing & Control Solution

Miscellaneous Functions:I2C Mux, I2C Expander, I2C Level Translator, I2C Bridge, Reset control logic, MDIO Mux, MDIO Expander, LED Test & Drive, USB-UART Maintenance Ports, SGPIO Backplane & Enclosure Management.Contact your local Sales Representative

アプリケーション ノート

PSoC 5
PSoC 3
PSoC 1
Power Supervision Solution
PSoC 5
PSoC 3
PSoC 1
PSoC 開発キット
PSoC Power Supervision Kit

アプリケーション ノート

  • AN76474 demonstrates how you can quickly implement and customize a full-featured power supervisor that supports up to 13 power supply rails with Cypress's PSoC® 3.

  • AN78646 describes the key concepts of power management, including voltage sequencing, fault detection, voltage and current monitoring, real-time trimming, and i2c host communication.the associated example project delivers a fully integrated power management system solution.


  • The CY8CKIT-001 PSoC® Development Kit (DVK) provides a common development platform where you can prototype and evaluate different solutions using any one of the PSoC 1, PSoC 3, PSoC 4, or PSoC 5 architectures.

  • The CY8CKIT-030 PSoC® 3 Development Kit enables you to evaluate, develop and prototype high precision analog, low-power and low-voltage applications powered by Cypress’s CY8C38 high precision analog device family.

  • The PSoC Power Supervision Expansion Board Kit enables you to evaluate System Power Supervision functions and capabilities of the PSoC architecture.

  • PSoC Programmer 3.24 or later and KitProg 2.14 or later are required to program the PSoC 4200L device on the PSoC 4 L-Series Pioneer Kit. PSoC Creator installation or the kit installation automatically installs PSoC Programmer and KitProg drivers.

  • The CY8CKIT-050 PSoC® 5LP Development Kit enables you to evaluate, develop and prototype high precision analog, low-power and low-voltage applicati


  • camtasiaスクリーンキャストで使用



  • PSoC Creator

    PSoC Creator は、最新技術を駆使したソフトウェア開発 IDE とグラフィック設計エディタを組み合わせ、他に類を見ないほど強力なハードウェアとソフトウェアの同時設計環境を実現しました。

  • PSoC Designer

    PSoC Designer は、特定アプリケーションの用件を満たすようPSoCをカスタマイズするのに使う画期的な統合設計環境(IDE)です。PSoC Designer ソフトウェアは、システム ブリング アップや製品化までの期間短縮を支援します。